The task is t identify the fault(s) and correct the router configurations to provide full connectivity between the routers.
Access to the router CLI can be gained by clicking on the appropriate host.
All passwords on all routers are cisco.
IP addresses are listed in the chart below.
Hub
Fa0/0 - 192.168.44.21
S1/0 - 192.0.18.6
S0/0 - 192.168.18.5
S0/1 - 192.168.10.5
Servers
Fa0/0 - 192.168.44.22
Fa1/0 - 192.168.60.81
Fa0/1 - 192.168.60.65
Office1
Fa0/0 - 192.168.60.97
Fa0/1 - 192.168.60.113
S0/0 - 192.168.18.6
Office2
Fa0/0 - 192.168.60.129
Fa0/1 - 192.168.60.145
S0/0 - 192.168.10.6
试验拓扑图
3COM华为.网络技术学院 http://www.3comcom.com Answer:
Explanation/Reference:
在增加路由器 Servers 之前,整个网络都正常,
增加Servers后, Servers 与 Hub 之间没有路由信息的交换更新!
要求检查修改配置, 实现网络里所有的网段都能建立连接互相访问!
共3页: 上一页 1 [2] [3] 下一页
收藏
推荐
评论(0条)
